Electrical & Instrumentation QC Inspector

Reference: BH-237708
Introduction:
  • Petrochemicals Project is currently seeking Electrical & Instrumentation QC Inspector to support the Pipeline and Early Work scope of work.
  • This position will be in Qatar through the completion of the project. The total duration for this assignment is expected to be 24 months.
  • It is preferred that the candidate is currently local (in Qatar) to simplify the onboarding processes.

General Requirements
  • Required Diploma Degree (Electrical / Electronics), but Preferred Bachelor's degree in a science-related field.
  • Minimum 5 years’ experience including a proactive attitude for personal safety and the safety of co-workers, and environmentally responsible operations.
  • Must have good safety approach and working knowledge of JSA, Method Statement and PTW system.
  • Knowledge of recognized and generally accepted good engineering practice and codes, risk-based inspection principles, and in-service techniques.
  • Good analytical and computer skills, specifically in MS Office Suite
  • Inspecting electrical wiring, Instrument, equipment, and installations to ensure they comply with local codes or international standards.
  • Inspecting electrical equipment such as transformers, generators, HV, MV and LV cables, grounding protection, lightening protection, and circuit breakers, to ensure they meet manufacturer specifications and ANSI/NFPA guidelines for safety.
  • Should have strong working knowledge of pre-commissioning / commissioning test like DC-hipot, AC voltage withstand, insulation resistance, oil BDV, DGA etc.
  • Inspecting facilities such as offices, and Treatment Plant to ensure they meet electrical safety standards.
  • Providing technical assistance to engineers to meet the facilities code requirements.
  • Inspecting electrical equipment to ensure they are properly installed and working efficiently.
  • Witness tests to verify that electrical equipment meets industry standards and company specifications for efficiency and capacity.


Specific Requirements:
  • Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls, and inspections, manage documents certifying tests, controls, and inspections.
  • Executes the specific inspections on materials, equipment, and construction/installation activities on site as per Inspection Test Plan (ITP), request For Inspection (RFI) and Material Inspection Request (MIR).
  • Checks cable laying and cable identification.
  • Witness/survey all relevant loop checks.
  • Witness all offline electrical tests like Hipot, IR, continuity test of power cables, Grounding, illumination survey, no load tests run etc.
  • Witness cable jointing and termination of power and control cables
  • Witness erection / installation of all I&E Equipment and ensure company specs or approved drawings are complied.
  • Review Method Statements, Procedures, O&M Manuals, FAT & SAT Reports.
  • Review as built drawings.
  • Develop punch-list as a result of inspections.
  • Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system.
  • Performs visual inspections, dimensional test, checks rating and material for connection.
  • Witness/Survey tests of continuity, insulation resistance.
  • Witness/survey safety valves calibrations.
  • Witness/survey instruments calibrations
  • Check installation of instruments.
  • Witness/survey functional test of instruments.
  • Inspect pneumatic signal connection.
  • Inspect fiber optic cable.
  • Witness/survey communication functionalities test.
  • Verify special processes and the relevant workers’ qualifications.
  • Witness the tests, controls and inspections carried out.
  • Ensure the correct implementation of the approved Inspection Test Plan
  • Monitor all material received at construction site as per requirements.
  • Monitor the closure of Non-Compliance Report (NCR), Corrective Action Reports.
  • Attend weekly Quality Standards Toolbox Talks with the Contractor QC and Construction Teams.
  • Interface with EPC Contractors accordance with the roles and responsibilities.
  • Providing field QA/QC support to the construction and commissioning team.
  • Participate in FAT, iFAT, SAT & iSAT for DCS, SCADA, PLC, PESD, FGS, MMS, WHCP, HPUs, Well control modules.
  • Must be able to remove and re-install all field instruments and be able to organize and carry out loop testing and trip testing.
  • Should be knowledgeable to carry out fault finding and routine maintenance of Pressure, Temperature, Level and Flow loops, including removal and reinstallation.
  • Should be able to undertake Pre-Commissioning and Functional Testing on new installations.
  • Can read and understand drawings and functional logic diagrams, cause and effect matrices and control and IPF narratives.
Company Background:

With over 90 years’ combined experience of delivering workforce solutions to the global energy industry, NES Fircroft is proud to be the world’s leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Infrastructure, Life Sciences, Mining, Automotive and Chemicals sectors worldwide. We provide tailored staffing solutions, sourced from a global talent pool by a dedicated, discipline specific team of consultants.

Add your CV and application details